Klondike Classic — Technical Data Sheet

Key specifications

*Coverage is indicative and will vary with substrate, application method and desired effect. Always confirm via sample panels under project conditions.

Compatible substrates

Klondike Classic is suitable for interior walls and ceilings when applied over properly prepared, primed substrates:

• New plaster and skimmed plasterboard (fully cured, smooth).
• Jointed plasterboard with correctly treated joints and repairs.
• Sound, previously painted surfaces (cleaned, de‑glossed and primed).
• Interior masonry/render that is dry, stable and primed.

Substrates must be stable, free from rising damp, efflorescence, loose coatings and contaminants. Glossy or critical surfaces should be sanded and primed in accordance with the Valpaint Klondike system sheet. For complex substrates, please consult Italian Surface Finishes.

System build — Klondike Classic metallic finish

The exact specification can vary with colour and effect, but a typical Klondike Classic metallic wall system is:

1. Substrate preparation — fill, sand and clean the substrate to a smooth finish. Remove loose paint and contaminants.
2. Primer / basecoat — apply the specified Valpaint primer or tinted basecoat (e.g. a dedicated Klondike base) evenly with roller, ensuring full coverage and uniform absorption. Allow to dry completely.
3. First coat of Klondike Classic — apply a thin, even coat using a soft brush or spalter. The aim is continuity, not texture. Allow to dry.
4. Second Klondike Classic coat — texture & movement — apply a second coat and immediately work the surface with the brush and a clean plastic trowel, compressing peaks and organising the metallic movement. Work wet‑in‑wet in controlled sections to avoid lap marks.
5. Optional protective sealer — in high‑contact or commercial areas, apply a compatible clear protective finish after full cure to improve cleanability and resistance to marking.

More advanced choreography (broken colour, stronger patina, directional movement) is taught within the Valpaint London Academy modules.

Performance & maintenance

Performance notes

• Provides a robust decorative film on vertical interior surfaces when applied over stable, suitably primed substrates.
• Designed for residential, retail and hospitality interiors where metallic feature walls are desired.
• Not intended for floors, permanent immersion, shower interiors or areas of continuous condensation.

Cleaning & care

• Allow approximately 7 days for full curing before first cleaning.
• Dust regularly with a soft cloth or vacuum with a soft brush attachment.
• Where sealed, light marks can usually be removed with a damp cloth and mild neutral detergent. Avoid aggressive scrubbing that could dull metallic highlights.
• Avoid abrasive pads, scouring powders, bleach and solvent‑based cleaners.

Health, safety & environment

• Water‑borne decorative coating with low VOC content, suitable for interior environments when used as directed.
• Ensure adequate ventilation during application and drying.
• Avoid contact with skin and eyes; wear suitable gloves and eye protection.
• Do not ingest. Keep out of reach of children.
• Dispose of residues and empty containers according to local regulations.
• Refer to the official Valpaint Safety Data Sheet (SDS) for full safety information.

Technical & specification summary

Klondike Classic by Valpaint, supplied and tinted in the UK by Italian Surface Finishes, is a textured metallic wall system for design‑led interiors. It offers:

• Highly controllable metallic texture and patina.
• Water‑borne, low‑VOC formulation.
• Compatibility with ISF’s Studio, Academy and Approved Applicator Network for repeatable results on site.

For project‑specific specifications, large‑scale mock‑ups or integration with other systems (e.g. Meteore 10 Cemento, Meteore 8 Lamé, Valsetin), please contact Italian Surface Finishes or arrange a visit to the London Studio.