Valrenna 2 — FAQ

Valrenna 2 is the next-generation Italian suede wall finish from Valpaint — a water-based coating that turns walls into a soft-touch textile surface. Curated in the UK by Italian Surface Finishes London, it refines the original Valrenna formula with smoother handling, higher yield and improved low-VOC credentials.

Valrenna 2 maintains the same elegant buckskin feel but introduces a modern binder system and a mandatory tinted-primer step for more predictable tone and faster, cleaner application. The result: a calmer hand, fewer joins, and richer consistency in colour and texture.

It’s the perfect balance of tactile warmth and contemporary restraint. Designers use it in luxury residences, hospitality suites and show homes to bring subtle depth where gloss paints feel too artificial.

Primer 400 (tinted, 10–20 % dilution) → Valrenna 2 (2 coats, 10–20 % dilution). The tinted base anchors the tone and provides the seamless foundation required for the suede effect.

Buckskin: short criss-cross brush strokes, then “caress” with a clean brush while workable.
Linen: alternate vertical/horizontal strokes across two coats for a woven texture.
Each creates its own rhythm — a hand-made textile finish on plaster.

Ultra-fine mineral pigments and the movement of the applicator’s brush produce a diffused matte depth that mimics authentic suede. The surface absorbs and scatters light instead of reflecting it, giving that signature “architectural calm.”

Visit the Valpaint London Showroom & Academy by Italian Surface Finishes. Full panels demonstrate Buckskin, Linen and Shantung effects under different lighting — perfect for client approvals.

Primer 400: ~11–12 m²/L (covering coat).
Valrenna 2: ~9–11 m²/L per coat.
Dust-free ~1 h, recoat 5–6 h, through-dry 24 h at 20 °C.

Brushes PV88/PV89 for the weave, a short-pile roller for the primer, and a clean soft brush to refine the nap. These tools create the subtle texture that defines Valrenna’s luxury feel.

Yes — once cured it forms a transparent micro-film that resists normal wear and dry cleaning. Treat it like fine suede: maintain gently, avoid harsh scrubbing or solvents.

Completely. Valrenna 2 is water-based, breathable and A+ indoor-air rated. It’s formaldehyde-free and aligns with sustainable design principles used in high-end UK projects.

Use only in dry interior zones. For waterproof decorative walls, specify E-VOLUTION PLUS or I-BETON PLUS systems from Valpaint.

Soft, diffused light enhances its matte calm; grazing light emphasises the nap. Always sample under project lighting — Valrenna’s mood shifts beautifully between daylight and warm artificial light.

Yes — through the VALCLONE / COLORI’ system. Italian Surface Finishes can create custom neutral and earthy tones tailored to British interiors.

Valrenna 2 = matte suede texture and tactile warmth.
Valsetin 2 = luminous silk sheen and light reflection.
Pair them together for a perfect contrast of texture and light within one scheme.

Yes — mix Linen and Buckskin styles on accent panels for visual rhythm. Test on a sample board first to lock stroke direction and blending sequence.

Small marks can be feathered with the same brush pressure. For larger zones, re-work the full wall to keep the nap continuous and invisible under light.

Apply between +5 °C and +30 °C; store between +10 °C and +30 °C. Avoid direct sunlight or air drafts during application and drying.

Yes — water-based, low-solvent, recyclable packaging. Produced in Italy under Valpaint’s ISO environmental standards and distributed in the UK through Italian Surface Finishes.

Exclusively from Italian Surface Finishes — the authorised Valpaint UK distributor. Visit the London showroom for samples, technical sheets and applicator training dates.

Omitting the tinted primer, changing stroke pressure mid-panel, or polishing the surface too aggressively. Maintain steady rhythm and test each tone before full application.

Yes — the Valpaint London Academy runs professional courses on Valrenna 2 and its companion systems. Graduates receive official ISF Valpaint Certification recognised by designers and contractors across the UK.

Primer 400 (tinted, 10–20 %) → Valrenna 2 (2 coats, 10–20 %) | Soft buckskin/suede wall finish | Interior dry walls | Water-based, low-VOC | Crafted in Italy, distributed by Italian Surface Finishes London.