01 / Quiet depth
Meteore 10 Intonaco
Light traces the hand-worked relief. Begin with the application, then find the colour that belongs in your room.
Explore the material ↗Soft textile character
Valrenna
A decorative textile effect with the appearance of suede, fine threads or woven linen. Explore the colour, then choose the movement that gives the surface its character.
Explore colours, application and the original catalogue. Loading the colours…
02 · The character
Loose movement. A thread. A weave.
Suede, Shantung and Linen create three different textile readings. A physical sample helps you judge the tactile quality in your own light.
03 · From material to wall
Made through the method.
Preparation, application and the selected materials belong to one finish. Review the complete cycle before beginning the work.
- 01
Prepare a consistent ground
Repair and prepare the wall with the specified primer cycle.
- 02
Build the finish in two coats
Follow the chosen Suede, Shantung or Linen application.
- 03
Judge it in the room
Review the actual colour and texture before continuing across a full wall.
04 · Before you begin
The practical detail.
Extra Soft references ending in M need individual review of the VALCLONE route. They are separate from the standard A–D colour recipes.
Read the complete manufacturer catalogue →Preparing the ground
Repair, dry and sand the surface, then treat it as required. Both Valrenna and Primer 400 are coloured to the relevant formula. The ground and finish do not necessarily receive the same pigment dose. The written catalogue specifies Primer 400 diluted 20% and a four-hour wait at 20°C before Valrenna. Its pictorial sequences show six hours. Allow for the actual surface and conditions and confirm the current sequence with ISF.
The two coats and practical coverage
All three documented effects use Valrenna diluted 10%, in two coats with around 5–6 hours at 20°C between them. Published Valrenna coverage is approximately 7–8 m²/L. The Italian technical paragraph gives Primer 400 as approximately 11–12 m²/L for a covering coat, depending on absorbency; the English line omits that numeric range. Use Order for your wall for project quantities and exact preparation. Agree the intended effect on a trial area before work begins.
Extra Soft M references
The supplied catalogue includes a separate Extra Soft group: 425 M, 428 M, 429 M, 432 M, 457 M and 459 M. Its M preparation is assigned to the VALCLONE tinting system. These identities are preserved in the reference index and sent to ISF for individual review; an A–D formula is never substituted.
Care and conditions
Valrenna is for interiors. The catalogue specifies application above 5°C and below 30°C. After 15 days, clean gently using a soft sponge moistened with water, avoiding rubbing that could mark or discolour the surface. Read the complete catalogue for surface preparation, drying, storage and handling. Photographs of bathrooms or other settings do not by themselves establish waterproofing or wet-area suitability.
Samples and colour in your room
The same finish changes with light, application and the surrounding colours. Use a physical sample and a trial area to confirm the intended result.
See sample options →Visit the London Studio →
