01 / Quiet depth
Meteore 10 Intonaco
Light traces the hand-worked relief. Begin with the application, then find the colour that belongs in your room.
Explore the material ↗Marble-like depth
Meteore 10 Marmorizzato
A marble-effect surface built in relief, then coloured in layers. Choose a complete Rif and follow the body, covering coats and vein colours through to the finished wall.
Explore colours, application and the original catalogue. Loading the colours…
02 · The character
Draw. Soften. Reveal.
The vein starts in the Meteore 10 body. The later colour layers cover and reveal that structure, giving depth to the finished surface.
03 · From material to wall
Made through the method.
Preparation, application and the selected materials belong to one finish. Review the complete cycle before beginning the work.
- 01
Draw the relief
Shape the vein in the Meteore 10 body with the documented tools.
- 02
Soften the high points
Refine the relief before the colouring sequence.
- 03
Cover and reveal
Apply the specified covering, wiped and vein colours in their intended order.
04 · Before you begin
The practical detail.
ISF confirms full-wall quantities for the wiped and veining stages. Individual supported stage materials can be ordered; the online reference is not a complete priced wall quotation.
Read the complete manufacturer catalogue →Coverage and the number of passes
The Sabulador Soft rate above describes the two covering coats. It is not a rate for every later veining pass combined. Keep the exact Rif recipe together when planning the materials. Allow 4 hours at 20°C between the two covering passes. Where a fourth pass is specified, work that third colour into the grooves, or selected parts of them, and blend with a damp, well-wrung sponge.
Preparation, optional protection and use
Prepare a stable, clean support, remove unstable coatings and repair as required. Apply white Primer 1200 and allow 6 hours at 20°C before Meteore 10. For greater water resistance, the catalogue describes optional Finish V18 Matt or Gloss after 24 hours at 20°C: one or two coats, with 4 hours between them. This is an interior decorative coating; it is not a waterproofing system or a marble slab. Apply and store above +10°C and below +30°C. Allow about 28 days for full hardening, depending on conditions. Trial the complete cycle and judge the applied sample in the intended light.
References, variation and the source
Rifs 185 and 187 have the same printed colour-stage recipe in this catalogue. Their specimens still differ: the formula alone cannot guarantee an identical visual result. Some further catalogue references use other finishing bases; they require individual review. The manufacturer warns of 15–20% variation from the catalogue and between batches. These notes follow the supplied Marmorizzato catalogue, edition 02/23, especially PDFs 10–11.
Samples and colour in your room
The same finish changes with light, application and the surrounding colours. Use a physical sample and a trial area to confirm the intended result.
See sample options →Visit the London Studio →
