01 / Quiet depth
Meteore 10 Intonaco
Light traces the hand-worked relief. Begin with the application, then find the colour that belongs in your room.
Explore the material ↗Luminous silk
Valsetin 2
A smooth satin finish with soft changes of light across the wall. Choose a complete base and colour reference, then plan the materials for your space.
Explore colours, application and the original catalogue. Loading the colours…
03 · From material to wall
Made through the method.
Preparation, application and the selected materials belong to one finish. Review the complete cycle before beginning the work.
- 01
A smooth foundation
Repair, fill and smooth the wall. Primer 400 is coloured to suit the chosen finish.
- 02
A thin, even layer
Work with the PV43 trowel, covering roughly a square metre at a time.
- 03
Cross the wet surface
Return in different directions to form the satin reflections.
04 · Before you begin
The practical detail.
The base belongs to the colour: Argento 700 and Oro 709 have their own tinted collections. Ghiaccio 701, Perla 710 and Oro Antico 714 retain their named identities.
Read the complete manufacturer catalogue →Preparing the wall
Remove loose or peeling paint, wash with a suitable soap, fill cracks and sand smooth. On a prepared older surface, the catalogue describes Primer 400 diluted 50% with water as a fixing coat, followed after 4–6 hours at 20°C by undiluted Primer 400. On a sound, smooth surface, treat filled areas first, then apply a covering coat over the whole wall. Allow approximately 4 hours at 20°C before the decorative finish. Colour Primer 400 in relation to the finish reference.
Application conditions and drying
Apply at +10°C to +30°C. At 20°C, the catalogue gives about 2 hours to dust-free, 4–6 hours to dry and approximately 24 hours to harden, depending on conditions. These are application guidelines, not guaranteed site timings.
Coverage and the amount you need
Valsetin 2 is approximately 7–9 m²/L for one covering coat. Primer 400 is approximately 11–12 m²/L for one covering coat. The actual surface and application affect coverage. Order for your wall handles wall measurements, preparation and pack quantities when you are ready to plan.
Colour, batches and a test area
Use a full test cycle on a small area before continuing across the wall. The catalogues warn that printed colours and batches can differ. Keep the finish coherent across each wall and follow the catalogue’s batch-mixing guidance. A physical applied reference helps judge the intended effect.
Care after application
Valsetin 2 is slightly washable with water and common detergents after 15 days. Allow the finish to harden before normal use. This guidance does not establish suitability for shower interiors or permanently wet surfaces.
Tools, cleaning and storage
The documented finish tool is the PV43 stainless-steel trowel. Clean equipment with soap and water. Keep containers tightly closed, between +5°C and +30°C, and follow the supplied technical and safety documents.
Samples and colour in your room
The same finish changes with light, application and the surrounding colours. Use a physical sample and a trial area to confirm the intended result.
See sample options →Visit the London Studio →
